Uploaded Test files
This commit is contained in:
parent
f584ad9d97
commit
2e81cb7d99
16627 changed files with 2065359 additions and 102444 deletions
|
@ -0,0 +1,236 @@
|
|||
# Distributed under the OSI-approved BSD 3-Clause License. See accompanying
|
||||
# file Copyright.txt or https://cmake.org/licensing for details.
|
||||
|
||||
#[=======================================================================[.rst:
|
||||
UseEcos
|
||||
-------
|
||||
|
||||
This module defines variables and macros required to build eCos application.
|
||||
|
||||
This file contains the following macros:
|
||||
ECOS_ADD_INCLUDE_DIRECTORIES() - add the eCos include dirs
|
||||
ECOS_ADD_EXECUTABLE(name source1 ... sourceN ) - create an eCos
|
||||
executable ECOS_ADJUST_DIRECTORY(VAR source1 ... sourceN ) - adjusts
|
||||
the path of the source files and puts the result into VAR
|
||||
|
||||
Macros for selecting the toolchain: ECOS_USE_ARM_ELF_TOOLS() - enable
|
||||
the ARM ELF toolchain for the directory where it is called
|
||||
ECOS_USE_I386_ELF_TOOLS() - enable the i386 ELF toolchain for the
|
||||
directory where it is called ECOS_USE_PPC_EABI_TOOLS() - enable the
|
||||
PowerPC toolchain for the directory where it is called
|
||||
|
||||
It contains the following variables: ECOS_DEFINITIONS
|
||||
ECOSCONFIG_EXECUTABLE ECOS_CONFIG_FILE - defaults to ecos.ecc, if your
|
||||
eCos configuration file has a different name, adjust this variable for
|
||||
internal use only:
|
||||
|
||||
::
|
||||
|
||||
ECOS_ADD_TARGET_LIB
|
||||
#]=======================================================================]
|
||||
|
||||
# first check that ecosconfig is available
|
||||
find_program(ECOSCONFIG_EXECUTABLE NAMES ecosconfig)
|
||||
if(NOT ECOSCONFIG_EXECUTABLE)
|
||||
message(SEND_ERROR "ecosconfig was not found. Either include it in the system path or set it manually using ccmake.")
|
||||
else()
|
||||
message(STATUS "Found ecosconfig: ${ECOSCONFIG_EXECUTABLE}")
|
||||
endif()
|
||||
|
||||
# check that ECOS_REPOSITORY is set correctly
|
||||
if (NOT EXISTS $ENV{ECOS_REPOSITORY}/ecos.db)
|
||||
message(SEND_ERROR "The environment variable ECOS_REPOSITORY is not set correctly. Set it to the directory which contains the file ecos.db")
|
||||
else ()
|
||||
message(STATUS "ECOS_REPOSITORY is set to $ENV{ECOS_REPOSITORY}")
|
||||
endif ()
|
||||
|
||||
# check that tclsh (coming with TCL) is available, otherwise ecosconfig doesn't work
|
||||
find_package(Tclsh)
|
||||
if (NOT TCL_TCLSH)
|
||||
message(SEND_ERROR "The TCL tclsh was not found. Please install TCL, it is required for building eCos applications.")
|
||||
else ()
|
||||
message(STATUS "tlcsh found: ${TCL_TCLSH}")
|
||||
endif ()
|
||||
|
||||
#add the globale include-diretories
|
||||
#usage: ECOS_ADD_INCLUDE_DIRECTORIES()
|
||||
macro(ECOS_ADD_INCLUDE_DIRECTORIES)
|
||||
#check for ProjectSources.txt one level higher
|
||||
if (EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/../ProjectSources.txt)
|
||||
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/../)
|
||||
else ()
|
||||
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/)
|
||||
endif ()
|
||||
|
||||
#the ecos include directory
|
||||
include_directories(${CMAKE_CURRENT_BINARY_DIR}/ecos/install/include/)
|
||||
|
||||
endmacro()
|
||||
|
||||
|
||||
#we want to compile for the xscale processor, in this case the following macro has to be called
|
||||
#usage: ECOS_USE_ARM_ELF_TOOLS()
|
||||
macro (ECOS_USE_ARM_ELF_TOOLS)
|
||||
set(CMAKE_CXX_COMPILER "arm-elf-c++")
|
||||
set(CMAKE_COMPILER_IS_GNUCXX 1)
|
||||
set(CMAKE_C_COMPILER "arm-elf-gcc")
|
||||
set(CMAKE_AR "arm-elf-ar")
|
||||
set(CMAKE_RANLIB "arm-elf-ranlib")
|
||||
#for linking
|
||||
set(ECOS_LD_MCPU "-mcpu=xscale")
|
||||
#for compiling
|
||||
add_definitions(-mcpu=xscale -mapcs-frame)
|
||||
#for the obj-tools
|
||||
set(ECOS_ARCH_PREFIX "arm-elf-")
|
||||
endmacro ()
|
||||
|
||||
#usage: ECOS_USE_PPC_EABI_TOOLS()
|
||||
macro (ECOS_USE_PPC_EABI_TOOLS)
|
||||
set(CMAKE_CXX_COMPILER "powerpc-eabi-c++")
|
||||
set(CMAKE_COMPILER_IS_GNUCXX 1)
|
||||
set(CMAKE_C_COMPILER "powerpc-eabi-gcc")
|
||||
set(CMAKE_AR "powerpc-eabi-ar")
|
||||
set(CMAKE_RANLIB "powerpc-eabi-ranlib")
|
||||
#for linking
|
||||
set(ECOS_LD_MCPU "")
|
||||
#for compiling
|
||||
add_definitions()
|
||||
#for the obj-tools
|
||||
set(ECOS_ARCH_PREFIX "powerpc-eabi-")
|
||||
endmacro ()
|
||||
|
||||
#usage: ECOS_USE_I386_ELF_TOOLS()
|
||||
macro (ECOS_USE_I386_ELF_TOOLS)
|
||||
set(CMAKE_CXX_COMPILER "i386-elf-c++")
|
||||
set(CMAKE_COMPILER_IS_GNUCXX 1)
|
||||
set(CMAKE_C_COMPILER "i386-elf-gcc")
|
||||
set(CMAKE_AR "i386-elf-ar")
|
||||
set(CMAKE_RANLIB "i386-elf-ranlib")
|
||||
#for linking
|
||||
set(ECOS_LD_MCPU "")
|
||||
#for compiling
|
||||
add_definitions()
|
||||
#for the obj-tools
|
||||
set(ECOS_ARCH_PREFIX "i386-elf-")
|
||||
endmacro ()
|
||||
|
||||
|
||||
#since the actual sources are located one level upwards
|
||||
#a "../" has to be prepended in front of every source file
|
||||
#call the following macro to achieve this, the first parameter
|
||||
#is the name of the new list of source files with adjusted paths,
|
||||
#followed by all source files
|
||||
#usage: ECOS_ADJUST_DIRECTORY(adjusted_SRCS ${my_srcs})
|
||||
macro(ECOS_ADJUST_DIRECTORY _target_FILES )
|
||||
foreach (_current_FILE ${ARGN})
|
||||
get_filename_component(_abs_FILE ${_current_FILE} ABSOLUTE)
|
||||
if (NOT ${_abs_FILE} STREQUAL ${_current_FILE})
|
||||
get_filename_component(_abs_FILE ${CMAKE_CURRENT_SOURCE_DIR}/../${_current_FILE} ABSOLUTE)
|
||||
endif ()
|
||||
list(APPEND ${_target_FILES} ${_abs_FILE})
|
||||
endforeach ()
|
||||
endmacro()
|
||||
|
||||
# the default ecos config file name
|
||||
# maybe in future also out-of-source builds may be possible
|
||||
set(ECOS_CONFIG_FILE ecos.ecc)
|
||||
|
||||
#creates the dependency from all source files on the ecos target.ld,
|
||||
#adds the command for compiling ecos
|
||||
macro(ECOS_ADD_TARGET_LIB)
|
||||
# when building out-of-source, create the ecos/ subdir
|
||||
if(NOT EXISTS ${CMAKE_CURRENT_BINARY_DIR}/ecos)
|
||||
file(MAKE_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/ecos)
|
||||
endif()
|
||||
|
||||
#sources depend on target.ld
|
||||
set_source_files_properties(
|
||||
${ARGN}
|
||||
PROPERTIES
|
||||
OBJECT_DEPENDS
|
||||
${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld
|
||||
)
|
||||
|
||||
add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld
|
||||
COMMAND sh -c \"make -C ${CMAKE_CURRENT_BINARY_DIR}/ecos || exit -1\; if [ -e ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld ] \; then touch ${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib/target.ld\; fi\"
|
||||
DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile
|
||||
)
|
||||
|
||||
add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile
|
||||
COMMAND sh -c \" cd ${CMAKE_CURRENT_BINARY_DIR}/ecos\; ${ECOSCONFIG_EXECUTABLE} --config=${CMAKE_CURRENT_SOURCE_DIR}/ecos/${ECOS_CONFIG_FILE} tree || exit -1\;\"
|
||||
DEPENDS ${CMAKE_CURRENT_SOURCE_DIR}/ecos/${ECOS_CONFIG_FILE}
|
||||
)
|
||||
|
||||
add_custom_target( ecos make -C ${CMAKE_CURRENT_BINARY_DIR}/ecos/ DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/ecos/makefile )
|
||||
endmacro()
|
||||
|
||||
# get the directory of the current file, used later on in the file
|
||||
get_filename_component( ECOS_CMAKE_MODULE_DIR ${CMAKE_CURRENT_LIST_FILE} PATH)
|
||||
|
||||
#macro for creating an executable ecos application
|
||||
#the first parameter is the name of the executable,
|
||||
#the second is the list of all source files (where the path
|
||||
#has been adjusted beforehand by calling ECOS_ADJUST_DIRECTORY()
|
||||
#usage: ECOS_ADD_EXECUTABLE(my_app ${adjusted_SRCS})
|
||||
macro(ECOS_ADD_EXECUTABLE _exe_NAME )
|
||||
#definitions, valid for all ecos projects
|
||||
#the optimization and "-g" for debugging has to be enabled
|
||||
#in the project-specific CMakeLists.txt
|
||||
add_definitions(-D__ECOS__=1 -D__ECOS=1)
|
||||
set(ECOS_DEFINITIONS -Wall -Wno-long-long -pipe -fno-builtin)
|
||||
|
||||
#the executable depends on ecos target.ld
|
||||
ECOS_ADD_TARGET_LIB(${ARGN})
|
||||
|
||||
# when using nmake makefiles, the custom buildtype suppresses the default cl.exe flags
|
||||
# and the rules for creating objects are adjusted for gcc
|
||||
set(CMAKE_BUILD_TYPE CUSTOM_ECOS_BUILD)
|
||||
set(CMAKE_C_COMPILE_OBJECT "<CMAKE_C_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
|
||||
set(CMAKE_CXX_COMPILE_OBJECT "<CMAKE_CXX_COMPILER> <DEFINES> <INCLUDES> <FLAGS> -o <OBJECT> -c <SOURCE>")
|
||||
# special link commands for ecos-executables
|
||||
set(CMAKE_CXX_LINK_EXECUTABLE "<CMAKE_CXX_COMPILER> <CMAKE_CXX_LINK_FLAGS> <OBJECTS> -o <TARGET> ${_ecos_EXTRA_LIBS} -nostdlib -nostartfiles -L${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib -Ttarget.ld ${ECOS_LD_MCPU}")
|
||||
set(CMAKE_C_LINK_EXECUTABLE "<CMAKE_C_COMPILER> <CMAKE_C_LINK_FLAGS> <OBJECTS> -o <TARGET> ${_ecos_EXTRA_LIBS} -nostdlib -nostartfiles -L${CMAKE_CURRENT_BINARY_DIR}/ecos/install/lib -Ttarget.ld ${ECOS_LD_MCPU}")
|
||||
# some strict compiler flags
|
||||
set (CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wstrict-prototypes")
|
||||
set (CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Woverloaded-virtual -fno-rtti -Wctor-dtor-privacy -fno-strict-aliasing -fno-exceptions")
|
||||
|
||||
add_executable(${_exe_NAME} ${ARGN})
|
||||
set_target_properties(${_exe_NAME} PROPERTIES SUFFIX ".elf")
|
||||
|
||||
#create a binary file
|
||||
add_custom_command(
|
||||
TARGET ${_exe_NAME}
|
||||
POST_BUILD
|
||||
COMMAND ${ECOS_ARCH_PREFIX}objcopy
|
||||
ARGS -O binary ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.bin
|
||||
)
|
||||
|
||||
#and an srec file
|
||||
add_custom_command(
|
||||
TARGET ${_exe_NAME}
|
||||
POST_BUILD
|
||||
COMMAND ${ECOS_ARCH_PREFIX}objcopy
|
||||
ARGS -O srec ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.srec
|
||||
)
|
||||
|
||||
#add the created files to the clean-files
|
||||
set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_CLEAN_FILES
|
||||
"${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.bin"
|
||||
"${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.srec"
|
||||
"${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst")
|
||||
|
||||
add_custom_target(ecosclean ${CMAKE_COMMAND} -DECOS_DIR=${CMAKE_CURRENT_BINARY_DIR}/ecos/ -P ${ECOS_CMAKE_MODULE_DIR}/ecos_clean.cmake )
|
||||
add_custom_target(normalclean ${CMAKE_MAKE_PROGRAM} clean WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR})
|
||||
add_dependencies (ecosclean normalclean)
|
||||
|
||||
|
||||
add_custom_target( listing
|
||||
COMMAND echo -e \"\\n--- Symbols sorted by address ---\\n\" > ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst
|
||||
COMMAND ${ECOS_ARCH_PREFIX}nm -S -C -n ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst
|
||||
COMMAND echo -e \"\\n--- Symbols sorted by size ---\\n\" >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst
|
||||
COMMAND ${ECOS_ARCH_PREFIX}nm -S -C -r --size-sort ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst
|
||||
COMMAND echo -e \"\\n--- Full assembly listing ---\\n\" >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst
|
||||
COMMAND ${ECOS_ARCH_PREFIX}objdump -S -x -d -C ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.elf >> ${CMAKE_CURRENT_BINARY_DIR}/${_exe_NAME}.lst )
|
||||
|
||||
endmacro()
|
||||
|
Loading…
Add table
Add a link
Reference in a new issue